Good Toddler Platform Bed

Apr 18th

A platform bed is a bed that sits on top of a higher frame. If you want to build a toddler platform bed, you can make it easy with a few pieces of furniture grade hardwoods, but you must keep safety in mind. You cannot make the platform bed high enough that a child would struggle to get in or be hurt if he fell out. Ideas for make toddler platform bed, measure the length and width of the mattress for your child’s bed with a tape measure. This gives you the dimensions of your platform bed frame.

Wooden Toddler Platform Bed
Wooden Toddler Platform Bed

To make toddler platform bed, drill four evenly spaced 4/1 inch holes across the width of each leg approximately 1/2 inch down each end of the discs. And then place the sideboards on their 1-inch sides and then place the headboard and footstool on their 1-inch sides. Line the shorter boards up at the ends of the serge. Drive 1/4 inch diameter with 2-inch-long wooden screws through the holes in the sack and into the main saddle and footstool. Lower the screws slightly to ensure that your child can not be caught on the screws.

13 Photos Gallery of: Good Toddler Platform Bed

Image of: Wooden Toddler Platform Bed
Image of: Toddler Platform Bed Plans
Image of: Best Toddler Platform Bed Ideas
Image of: Toddler Platform Bed Design
Image of: The Toddler Platform Bed
Image of: Simple Toddler Platform Bed
Image of: Nice Toddler Platform Bed Ideas
Image of: New Toddler Platform Bed
Image of: Modern Toddler Platform Bed
Image of: Good Toddler Platform Bed Decors
Image of: Good Toddler Platform Bed Ideas
Image of: Awesome Toddler Platform Bed
Image of: Amazing Toddler Platform Bed
 

Ideas for make toddler platform bed cut half inch thick furniture grade plywood to the dimensions obtained and then place plywood on top of the bed frame. This creates a platform for the mattress to rest on. And then drill evenly distributed 1/4 inch holes in each corner and approximately 12 inches down the sides. Place the holes half-inch inwards from the edges of the plywood. Drive 1/4 inch diameter by 2 inch long wooden screws for holes in plywood and into the design. Stain or paint framing to the desired color and wait for paint or bed to dry before moving on. Place the toddler mattress on the plywood top.